Disclaimer: The following material is being kept online for archival purposes.

Although accurate at the time of publication, it is no longer being updated. The page may contain broken links or outdated information, and parts may not function in current web browsers.

GOES 6,7
Project Overview


Introduction a black block to force space between the columns GOES 6 was the eighth in a series of NASA-developed, NOAA-operated, geosynchronous, and operational spacecraft. The spin-stabilized spacecraft carried:
  • a visible infrared spin-scan radiometer (VISSR) atmospheric sounder (VAS) to provide high-quality day/night cloudcover data, to take radiance-derived temperatures of the earth/atmosphere system, and to determine atmospheric temperature and water vapor content at various levels.
  • a meteorological data collection system to relay processed data from central weather facilities to regional stations equipped with APT and to collect and retransmit data from remotely located earth-based platforms.
  • a space environment monitor (SEM) system to measure proton, electron, and solar X-ray fluxes and magnetic fields.
The cylindrically shaped spacecraft measured 190.5 cm in diameter and 230 cm in length, exclusive of a magnetometer that extended an additional 83 cm beyond the cylindrical shell. The primary structural members were a honeycombed equipment shelf and a thrust tube. The VISSR telescope, which was mounted on the equipment shelf, viewed the earth through a special aperture in the side of the spacecraft. A support structure extended radially from the thrust tube and was affixed to the solar panels, which formed the outer wall of the spacecraft to provide the primary source of electrical power. Located in the annulus-shaped space between the thrust tube and the solar panels were stationkeeping and dynamics control equipment, batteries, and most of the SEM equipment. Proper spacecraft attitude and spin rate (approximately 100 rpm) were maintained by two separate sets of jet thrusters mounted around the spacecraft equator and activated by ground command. The spacecraft used both UHF-band and S-band frequencies in its telemetry and command subsystem. A low-power VHF transponder provided telemetry and command during launch and then served as a backup for the primary subsystem once the spacecraft attained synchronous orbit. GOES 6 was moved from its 135 deg W position to a more central 98 deg W position when GOES 5 failed on July 29, 1984.

GOES-6 continued to supply data to the ISTP CDHF up through November of 1994. GOES-7 is currently supplying key parameter data products. GOES-8 and GOES-9 are expected to start supplying key parameter data products in the near future.


Project Scientist This forces space between the columns Donald Fairfield
Phone: (301) 286-7472
e-mail: u2dhf@lepdhf.gsfc.nasa.gov

Instrument Descriptions This forces spacing between the columns EPS
MAG


Comments/Questions/Suggestions: Natalie Jaquith
Official NASA Contact: Barbara Giles
/ NASA Home / Goddard Space Flight Center Home /

Above is background material for archival reference only.

NASA Logo, National Aeronautics and Space Administration
NASA Official: Adam Szabo

Curators: Robert Candey, Alex Young, Tamara Kovalick

NASA Privacy, Security, Notices